manualshive.com logo in svg

Hyundai Accent 2017, Owner'S Manual

Share
Download
Hyundai Accent 2017 Owner'S Manual Download Page 278

What to do in an emergency

6-30

7. Connect between compressor and

the vehicle power outlet using the
cable and connectors (3).

8. With the ignition switched on:
Switch on the compressor and let it
run for approximately 3 minutes to fill
the sealant. The inflation pressure of
the tire after filling is unimportant.

9. Switch off the compressor.
10. Detach the hoses from the

sealant bottle connector and
from the tire valve.

Return the Tire Mobility Kit to its stor-
age location in the vehicle.

Distributing the sealant
Immediately drive approximately
4~6miles (7~10km or, about 10min)
to evenly distribute the sealant in the
tire.
Do not exceed a speed of 50 mph
(80 km/h). If possible, do not fall
below a speed of 12 mph (20 km/h).
While driving, if you experience any
unusual vibration, ride disturbance or
noise, reduce your speed and drive
with caution until you can safely pull
off of the side of the road.
Call for road side service or towing.
When you use the Tire Mobility Kit,
the tire pressure sensors and wheel
may be damaged by sealant, remove
the sealant stained with tire pressure
sensors and wheel and inspect in
authorized dealer.

CAUTION 

- Tire  pressure

Do not attempt to drive your
vehicle if the tire pressure is
below 200kpa (29 PSI). This
could result in an accident due
to sudden tire failure.

WARNING 

- Carbon

monoxide

Do not leave your vehicle run-
ning in a poorly ventilated area
for extended periods of time.
Carbon monoxide poisoning
and suffocation can occur.

ORB064015

nasicoelec.ir

Summary of Contents for Accent 2017





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands