manualshive.com logo in svg

Hyundai Accent 2017, Owner'S Manual

Share
Download
Hyundai Accent 2017 Owner'S Manual Download Page 227

Driving your vehicle

5-24

• Use caution when parking on a hill.

Firmly engage the parking brake and
place the shift lever in P (automatic
transaxle) or in first or reverse gear
(manual transaxle). If your vehicle is
facing downhill, turn the front wheels
into the curb to help keep the vehicle
from rolling. If your vehicle is facing
uphill, turn the front wheels away from
the curb to help keep the vehicle from
rolling. If there is no curb or if it is
required by other conditions to keep
the vehicle from rolling, block the
wheels.

• Under some conditions your parking

brake can freeze in the engaged posi-
tion. This is most likely to happen when
there is an accumulation of snow or ice
around or near the rear brakes or if the
brakes are wet. If there is a risk that the
parking brake may freeze, apply it only
temporarily while you put the gear
selector lever in P (automatic
transaxle) or in first or reverse gear
(manual transaxle) and block the rear
wheels so the vehicle cannot roll. Then
release the parking brake.

• Do not hold the vehicle on the incline

with the accelerator pedal pressed.
This can cause the transaxle to over-
heat. Always use the brake pedal or
parking brake.

Vehicle stability management
(VSM) (if equipped)

This system provides further enhance-
ments to vehicle stability and steering
responses when the vehicle is driving on a
slippery road or the vehicle detects a
change in coefficient of friction between
the left and right wheels.

VSM operation

When the VSM is in operation, ESC indi-
cator light (

) blinks.

When the vehicle stability management
is operating properly, you can feel a slight
pulsation in the vehicle and/or abnormal
steering responses (EPS). This is only
the effect of brake and EPS control and
is a normal operating condition.

The VSM does not operate when: 

• Driving on a gradient or incline 
• Driving in reverse
• ESC OFF indicator light (

) remains

on the instrument cluster

• EPS indicator light remains on the

instrument cluster

VSM operation off

If you press the ESC OFF button to turn off
the ESC, the VSM will also cancel and the
ESC OFF indicator light (

) illuminates.

To turn on the VSM, press the button again.
The ESC OFF indicator light goes out.

Malfunction indicator

The VSM can be deactivated even if you
don't cancel the VSM operation by press-
ing the ESC OFF button. It indicates that
a malfunction has been detected some-
where in the Electric Power Steering sys-
tem or VSM system. If the ESC indicator
light (

) or EPS warning light (

)

remains on, take your vehicle to an
authorized HYUNDAI dealer and have
the system checked.

nasicoelec.ir

Summary of Contents for Accent 2017





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands