manualshive.com logo in svg

Hyundai Accent 2017, Owner'S Manual

Share
Download
Hyundai Accent 2017 Owner'S Manual Download Page 279

6-31

What to do in an emergency

Checking the tire inflation pres-
sure
1. After driving approximately 4 ~ 6

miles (7 ~ 10 km or about 10min),
stop at a safe location.

2. Connect the filling hose (2) of the

compressor (clip mounted side)
directly and then connect the fill-
ing hose (2) (opposite side) to the
tire valve.

3. Connect between compressor and

the vehicle power outlet using the
cable and connectors.

4. Adjust the tire inflation pressure to

the recommended tire inflation.

With the ignition switched on, pro-

ceed as follows.
- To increase the inflation pres-

sure : Switch on the compres-
sor, position I. To check the cur-
rent inflation pressure setting,
briefly switch off the compressor.

✽

✽

NOTICE

The pressure gauge may show high-
er than actual reading when the
compressor is running. To get an
accurate tire pressure, the compres-
sor needs to be turned off.

- To reduce the inflation pres-

sure: Press the button (8) on the
compressor hose.

CAUTION 

- Tire  pressure

sensor

When you use the Tire Mobility
Kit including sealant not
approved by HYUNDAI, the tire
pressure sensors may be dam-
aged by sealant. The sealant on
the tire pressure sensor and
wheel should be removed when
you replace the tire with a new
one and inspect the tire pressure
sensors in authorized dealer.

nasicoelec.ir

Summary of Contents for Accent 2017





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands