3-50
ASSEMBLY OF DIFFERENTIAL
ASSEMBLY
Assemble thrust washer, side gear and
spider with gears and then install them to
the differential housing.
Apply grease on the bevel gear and thrust
washer.
(1)
50D7EDA37
50D7EDA38
3)
Tighten 12 bolts(1) to the differential
housing.
Apply loctite #271 or #277 on the thread of
bolt.
·
Tightening torque : 5.0~7.5
kgf
·
m
(36~54
lbf
·
ft
)
Assemble differential housing.
Check marks on the housing.
Match two marks at the same
position.
(3)
Assemble ring gear by tightening 12
bolts(2).
Apply loctite #271 or #277 on the thread of
bolt.
·
Tightening torque : 12.5~14.5
kgf
·
m
(90~105
lbf
·
ft
)
(4)
50D7EDA39
50D7EDA40
(2)
※
Summary of Contents for 60L-7A
