Hyundai 60L-7A, Manual

Page: 89 / 217

3-48
Using different kinds of shims, adjust shim
thickness as measured by previous
equation. Place shims at the bearing
place.
Using a jig, assemble drive bearing so that
the outer race contact with the bearing
place. (2)
50D7EDA31
Heat inner race of bearing to max 100
。
C
and then assemble it to the pinion shaft.
Also inner race should contact with
bearing place.
Measuring play of bevel pinion shaft
end
Measure shim thickness by following
method.
Dimension "
Q " : Distance from bearing
outer race surface to spacer surface.
Dimension "
S " : Distance from bearing
outer race surface to inner race surface.
From the below equation, define required
shim thickness
Z .
" Z = S + Q "
EX) : From the bearing
S = 2.25
mm
(0.09
in
)
From the housing
Q = 3.15
mm
(0.12
in
)
Needed shim thickness Z :
(3)
·
50D7EDA32
50D7EDA33
50D7EDA34
P
2.25(0.089)
2.30(0.091)
2.35(0.093)
2.40(0.094)
2.45(0.096)
Q
3.15(0.124)
3.15(0.124)
3.15(0.124)
3.15(0.124)
3.15(0.124)
Z
5.40(0.213)
5.45(0.215)
5.50(0.217)
5.55(0.219)
5.60(0.220)
Unit : mm(in)