7-34
Inspect the breather cover (A) and base (C) for
cracks or other damage.
Check for internal obstructions or sludge
buildup.
Clean the crankcase breather cover with hot,
soapy water and a soft brush.
Rinse the cover with clean water and dry with
compressed air.
Do not use soapy
Do not use soapy water to clean or rinse the
water to clean or rinse the
breather base. Clean the base with a wet rag
breather base. Clean the base with a wet rag
to prevent water from entering the crankcase.
to prevent water from entering the crankcase.
OK
A
C
7709A6MI32
(7)
(8)
(9)
(10)
※
Lubricate the breather element O-ring seal with
clean lubricating oil.
7709A6MI33
(11)
Install the new breather element (B) onto the
breather base (C).
Install the crankcase breather cover (A).
Install the eleven crankcase breather cover
capscrews.
A
B
C
7709A6MI31
(12)
(13)
(14)
Tighten the capscrews in the sequence shown.
·
Tightening torque : 0.51 kgt
·
m (3.69 lbf
·
ft)
10
6
2
3
7
11
8
4
1
5
9
7709A6MI34
(15)
