manualshive.com logo in svg

Hyundai 2007 Tiburon, Owner'S Manual

The Hyundai 2007 Tiburon is a sleek and stylish sports coupe, featuring a powerful engine and a range of exciting features. Explore its Brochure & Specs to discover its impressive performance, technology, and design aspects. Download the manual for free from manualshive.com to unleash the full potential of this extraordinary vehicle.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

19

!

Release the button to lock the anchor into
position. Try sliding the height adjuster to make
sure that it has locked into the position.

WARNING:

o Verify the shoulder belt anchor is locked

into position at the appropriate height.
Never position the shoulder belt across
your neck or face.  Improperly posi-
tioned seat belts can cause serious inju-
ries in an accident.

o Failure to replace seat belts after an

accident could leave you with damaged
seat belts that will not provide protec-
tion in the event of another collision
leading to personal injury or death.
Replace your seat belts after being in an
accident as soon as possible.

B170A04A-AAT

Height Adjustable Front Seat Shoulder
Belt

You can adjust the height of the shoulder belt
anchor to one of the 4 positions for maximum
comfort and safety.
If the height of the adjusting seat belt is too near
your neck, you will not be getting the most
effective protection. The shoulder portion should
be adjusted so that it lies across your chest and
midway over your shoulder nearest the door
and not your neck.
To adjust the height of the seat belt anchor,
lower or raise the height adjuster into an appro-
priate position. To raise the height adjuster, pull
it up. To lower it, push it down while pressing the
height adjuster button.

HGK2038

B180A01L-AAT

SEAT BELT-Driver's 3-Point System with
Emergency Locking Retractor:
To Fasten Your Belt

To fasten your seat belt, pull it out of the retractor
and insert the metal tab into the buckle. There
will be an audible "click" when the tab locks into
the buckle.
The seat belt automatically adjusts to the proper
length only after the lap belt portion is adjusted
manually so that it fits snugly around your hips.
If you lean forward in a slow, easy motion, the
belt will extend and let you move around. If there
is a sudden stop or impact, however, the belt will
lock into position. It will also lock if you try to lean
forward too quickly. Check to make sure that
the belt is properly locked and that the belt is not
twisted.

B180A01NF

gkflhma-1a.p65

9/12/2006, 3:15 PM

19

Summary of Contents for 2007 Tiburon














































































































































































































































































Reviews:

No comments

Related manuals for 2007 Tiburon

Camcar 40000 Manual preview
40000
Brand: Camcar Pages: 6
Ignition 63-231 Quick Start preview
63-231
Brand: Ignition Pages: 1
Rightline Gear Car Top Duffle Bag Setup Manual preview
Car Top Duffle Bag
Brand: Rightline Gear Pages: 2
Edelbrock 6883 Instructions preview
6883
Brand: Edelbrock Pages: 2
SnapPad EQ Round Installation Instructions preview
EQ Round
Brand: SnapPad Pages: 5
MASCOT SMARTCHARGER User Manual preview
SMARTCHARGER
Brand: MASCOT Pages: 12
Camoplast Polaris TATOU 4S Installation Manuallines preview
Polaris TATOU 4S
Brand: Camoplast Pages: 13
Veigel S47290920 Installation And Operating Instructions Manual preview
S47290920
Brand: Veigel Pages: 24
Cellular Line interphone Instruction Manual preview
interphone
Brand: Cellular Line Pages: 25
WABCO Truck Training Model Operating Instructions Manual preview
Truck Training Model
Brand: WABCO Pages: 56
RBO RBO4038 Product Manual preview
RBO4038
Brand: RBO Pages: 15
Safe Fleet PRIME DESIGN HXR-269-E-UM3-80 Manual preview
PRIME DESIGN HXR-269-E-UM3-80
Brand: Safe Fleet Pages: 12
Jeep Grand Cherokee SRT 2019 Owner'S Manual preview
Grand Cherokee SRT 2019
Brand: Jeep Pages: 656
FORM FIT 8F 00 Installation Instructions preview
8F 00
Brand: FORM FIT Pages: 2
Yakima K974 Manual preview
K974
Brand: Yakima Pages: 11
Toyota 2011 Camry SE V6 Brochure & Specs preview
2011 Camry SE V6
Brand: Toyota Pages: 33
Waeco MagicSafe MSG150 Installation And Operating Manua preview
MagicSafe MSG150
Brand: Waeco Pages: 20
TOGU Airgo Active cushion / Comfort Manual And Maintenance Instructions preview
Airgo Active cushion / Comfort
Brand: TOGU Pages: 2

Brands by name

Popular brands

Load more brands