Hyundai 2007 Tiburon Owner'S Manual Download Page 90

Page: 90 / 269

FEATURES OF YOUR HYUNDAI

STEERING WHEEL TILT LEVER

B600A01HP-AAT

(If installed)

To adjust the steering wheel:
1. Pull the lever toward you and hold it to unlock.
2. Raise or lower the steering wheel to the

desired position.

3. After adjustment, release the lever.

WARNING:

Do not attempt to adjust the steering wheel
while driving as this may result in loss of
control of the vehicle and serious injury or
death.

OGK046022

WARNING:

Do not place the sun visor in such a manner
that it obscures visibility of the roadway,
traffic or other objects.

B580C01JM-AAT

Sun Visor Extender (If Installed)

Your vehicle is equipped with sun visor extend-
ers that may be used when the visor is in the side
glass position.

B580C01GK

gkflhma-1a.p65

9/12/2006, 3:17 PM

Summary of Contents for 2007 Tiburon














































































































































































































































































Search results

Summary of Contents for 2007 Tiburon

Reviews:

Related manuals for 2007 Tiburon

Brands by name

Popular brands

Hyundai 2007 Tiburon, Owner'S Manual

Search results

Summary of Contents for 2007 Tiburon

Reviews:

Related manuals for 2007 Tiburon

Brands by name

Popular brands