manualshive.com logo in svg

Hyundai 2007 Tiburon, Owner'S Manual

The Hyundai 2007 Tiburon is a sleek and stylish sports coupe, featuring a powerful engine and a range of exciting features. Explore its Brochure & Specs to discover its impressive performance, technology, and design aspects. Download the manual for free from manualshive.com to unleash the full potential of this extraordinary vehicle.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

37

CAUTION:

When installing a container of liquid air
freshener inside a vehicle, do not place it
near the instrument cluster nor on the in-
strument panel pad surface. If there is any
leakage from the air freshener onto these
areas (instrument cluster, instrument panel
pad or air ventilator), it may damage these
parts. If the liquid from the air freshener
does leak onto these areas, wash them with
water immediately.

!

!

B240B05L

WARNING:

o If an airbag deploys, there may be a loud

noise followed by a fine dust released in
the vehicle.  These conditions are nor-
mal and are not hazardous - the airbags
are packed in this fine powder.  The dust
generated during airbag deployment
may cause skin or eye irritation as well as
aggravate asthma for some persons.
Always wash all exposed skin areas thor-
oughly with lukewarm water and a mild
soap after an accident in which the
airbags were deployed.

o The SRS can function only when the

ignition key is in the "ON" position. If the
SRS "AIRBAG" warning light does  not
illuminute, or continuously remains on
after illuminating for about 6 seconds
when the ignition key is turned to the
"ON" position, or after the engine is
started, illuminates while driving, the
SRS is not working properly. If this oc-
curs, have your vehicle immediately in-
spected by your Hyundai dealer.

o Before you replace a fuse or disconnect

a battery terminal, turn the ignition key
to the "LOCK"  position or remove the
ignition key. Never remove or replace the
air bag related fuse(s) when the ignition
key is in the "ON" position. Failure to
heed this warning will cause the SRS
"AIRBAG" warning light to illuminate.

Passenger's Airbag

B990A01GK-AAT

Occupant Classification System

OGK036023N

Your vehicle is equipped with an occupant
classification system in the front passenger's
seat.
The occupant classification system is designed
to detect the presence of a properly-seated
front passenger and determine if the
passenger's front air bag should be enabled
(may inflate) or not. The driver's front air bag is
not affected or controlled by the occupant clas-
sification system.

gkflhma-1a.p65

9/12/2006, 3:16 PM

37

Summary of Contents for 2007 Tiburon














































































































































































































































































Reviews:

No comments

Related manuals for 2007 Tiburon

Daihatsu G200 Service Manual preview
G200
Brand: Daihatsu Pages: 485
Taffio CH7102-FCX9 Quick Start Manual preview
CH7102-FCX9
Brand: Taffio Pages: 8
Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
Whispbar K925W Fitting Instructions Manual preview
K925W
Brand: Whispbar Pages: 15
PEUGEOT Partner Origin Handbook preview
Partner Origin
Brand: PEUGEOT Pages: 128
Schumacher Electric SPI6 Owner'S Manual preview
SPI6
Brand: Schumacher Electric Pages: 87
Cadillac 2009 ESCALADE ESV Owner'S Manual preview
2009 ESCALADE ESV
Brand: Cadillac Pages: 602
BMW E46/2 Coupe Manual preview
E46/2 Coupe
Brand: BMW Pages: 55
Whispbar K496W Fitting Instructions Manual preview
K496W
Brand: Whispbar Pages: 15
Skoda Fabia II 2007 Workshop Manual preview
Fabia II 2007
Brand: Skoda Pages: 165
Mazda 2010 MX-5 Miata Specification preview
2010 MX-5 Miata
Brand: Mazda Pages: 8
Toyota RAV-4 2015 Series Owner'S Manual Supplement preview
RAV-4 2015 Series
Brand: Toyota Pages: 50
Saab 2000 9-5 2.3 Turbo Ecopower Owner'S Manual preview
2000 9-5 2.3 Turbo Ecopower
Brand: Saab Pages: 256
V8 equipment E.BEX Manual preview
E.BEX
Brand: V8 equipment Pages: 34
Saab 2006 9-5 Owner'S Manual preview
2006 9-5
Brand: Saab Pages: 288
Ranger design 1525-PC Installation Manual preview
1525-PC
Brand: Ranger design Pages: 22
Sintrones SBOX-2320 User Manual preview
SBOX-2320
Brand: Sintrones Pages: 55
Edelbrock PRO-FLO XT 3527 User Manual preview
PRO-FLO XT 3527
Brand: Edelbrock Pages: 39

Brands by name

Popular brands

Load more brands