manualshive.com logo in svg

Hyundai 2007 Tiburon, Owner'S Manual

The Hyundai 2007 Tiburon is a sleek and stylish sports coupe, featuring a powerful engine and a range of exciting features. Explore its Brochure & Specs to discover its impressive performance, technology, and design aspects. Download the manual for free from manualshive.com to unleash the full potential of this extraordinary vehicle.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

18

B160C01A-AAT

Keep Belts Clean and Dry

Seat belts should be kept clean and dry. If belts
become dirty, they can be cleaned by using a
mild soap solution and warm water. Bleach, dye,
strong detergents or abrasives should not be
used because they may damage and weaken
the fabric.

B160D01A-AAT

When to Replace Seat Belts

Entire in-use seat belt assembly or assemblies
should be replaced if the vehicle has been
involved in an accident. This should be done
even if no damage is visible. Additional ques-
tions concerning seat belt operation should be
directed to your Hyundai Dealer.

!

B150G02A-AAT

Do Not Lie Down

To reduce the chance of injuries in the event of
an accident and to achieve maximum effective-
ness of the restraint system, all passengers
should be sitting up and the front seats should
be in an upright position when the car is moving.
A seat belt cannot provide proper protection if
the person is lying down in the rear seat or if the
front seat is in a reclined position.

WARNING:

Riding with a reclined seatback increases
your chance of serious or fatal injuries in
the event of a collision or sudden stop.  The
protection of your restraint system (seat
belts and airbags) is greatly reduced by
reclining your seat.  Seat belts must be snug
against your hips and chest to work prop-
erly.  The more the seatback is reclined, the
greater the chance that an occupant's hips
will slide under the lap belt causing serious
internal injuries or the occupant's neck
could strike the shoulder belt.  Drivers and
passengers should always sit well back in
their seats, properly belted (see page 1-19),
and with the seatbacks upright.

!

B160A02A-AAT

Care of Seat Belts

Seat belt systems should never be disassembled
or modified. In addition, care should be taken to
assure that seat belts and belt hardware are not
damaged by seat hinges, doors or other abuse.

WARNING:

When you return the rear seatback to its
upright position after the rear seatback was
folded down, be careful not to damage the
seat belt webbing or buckle.  Be sure that
the webbing or buckle does not get caught
or pinched in the rear seat.  A seat belt with
damaged webbing or buckle will not be as
strong and could possibly fail during a
collision or sudden stop, resulting in seri-
ous injury.

B160B01A-AAT

Periodic Inspection

It is recommended that all seat belts be in-
spected periodically for wear or damage of any
kind. Parts of the system that are damaged
should be replaced as soon as possible.

gkflhma-1a.p65

9/12/2006, 3:15 PM

18

Summary of Contents for 2007 Tiburon














































































































































































































































































Reviews:

No comments

Related manuals for 2007 Tiburon

Dakota Digital VHX-37F Installation preview
VHX-37F
Brand: Dakota Digital Pages: 2
Dakota Digital BIM-01-2 Manual preview
BIM-01-2
Brand: Dakota Digital Pages: 7
Prorack K383 Fitting Instructions Manual preview
K383
Brand: Prorack Pages: 14
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Brand: Volvo Pages: 188
Gator GX5HDKT User Manual preview
GX5HDKT
Brand: Gator Pages: 8
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
Uebler X21 nano Mounting And Operating Instructions preview
X21 nano
Brand: Uebler Pages: 56
Inbay 241170-53-1 Installation Manual preview
241170-53-1
Brand: Inbay Pages: 20
Zap XEBRA ZAPCAR Series Owner'S Manual preview
XEBRA ZAPCAR Series
Brand: Zap Pages: 16
MVG 0845 C Manual preview
0845 C
Brand: MVG Pages: 18
Racelogic Speed & Route Profiler Manual preview
Speed & Route Profiler
Brand: Racelogic Pages: 24
ECS FIA-030-B Fitting Instructions preview
FIA-030-B
Brand: ECS Pages: 4
Whispbar WB751 Manual preview
WB751
Brand: Whispbar Pages: 15
Broadfeet RSLX-385-68S Installation Instructions preview
RSLX-385-68S
Brand: Broadfeet Pages: 2
Saab 2006 9-5 Owner'S Manual preview
2006 9-5
Brand: Saab Pages: 288

Brands by name

Popular brands

Load more brands