Hyundai 2007 Tiburon Owner'S Manual Download Page 134

Page: 134 / 269

FEATURES OF YOUR HYUNDAI

122

BALANCE

FADER

Turn the TUNE Controller
clockwise to increase right
speaker volume and coun-
terclockwise to increase left
speaker volume.

Turn the TUNE Controller
clockwise to increase rear
speaker volume and coun-
terclockwise to increase
front speaker volume.

CAUTION:

o Do not place beverages close to the

audio system. The audio system mecha-
nism may be damaged if you spill them.

o Do not strike or allow anything to impact

the audio system, damage to the system
mechanisms could occur.

gkflhma-1b.p65

9/12/2006, 3:19 PM

122

Summary of Contents for 2007 Tiburon














































































































































































































































































Search results

Summary of Contents for 2007 Tiburon

Reviews:

Related manuals for 2007 Tiburon

Brands by name

Popular brands

Hyundai 2007 Tiburon, Owner'S Manual

Search results

Summary of Contents for 2007 Tiburon

Reviews:

Related manuals for 2007 Tiburon

Brands by name

Popular brands