Hyundai 2007 Tiburon Owner'S Manual Download Page 101

Page: 101 / 269

FEATURES OF YOUR HYUNDAI

The A/C or the air intake control switch return
to its former setting.

A/C

ON or OFF *

NOTE:

o The air intake control switch will change

to " " mode when the ignition switch
is turned "ON" with the MAX A/C mode
selected.

o When you change to another mode from

MAX A/C, the A/C and the air intake
control switch are set to the following
chart.

Air Intake

Control Switch

or *

OGK016095N

OFF-Level

Air is discharged through the windshield de-
froster nozzle, side defroster nozzle and side
ventilator.

NOTE:

If the air flow control is off, the air intake
control is set to the fresh mode automati-
cally.

HEATING CONTROLS

B690A02S-AAT

For normal heating operation, set the air intake
control to the fresh air (

) position and the

air flow control to the floor (

) position.

For faster heating, the air intake control switch
should be set in the recirculate (

) position.

If the windows fog up, set the air flow control to
the defrost (

) position. (The A/C will turn on

automatically and "Fresh" mode will be acti-
vated.)

For maximum heat, move the temperature con-
trol to "Warm".

OGK046038A

gkflhma-1b.p65

9/12/2006, 3:18 PM

Summary of Contents for 2007 Tiburon














































































































































































































































































Search results

Summary of Contents for 2007 Tiburon

Reviews:

Related manuals for 2007 Tiburon

Brands by name

Popular brands

Hyundai 2007 Tiburon, Owner'S Manual

Search results

Summary of Contents for 2007 Tiburon

Reviews:

Related manuals for 2007 Tiburon

Brands by name

Popular brands