Hyundai 2007 Tiburon Owner'S Manual Download Page 103

Page: 103 / 269

FEATURES OF YOUR HYUNDAI

To use the air conditioning to cool the interior:

o Adjust the air flow control to the desired

position.

o Turn on the air conditioning switch by push-

ing in on the switch. The air conditioning
indicator light should come on at the same
time.

o Set the air intake control switch to the fresh

air (

) position.

o Adjust the fan control to the desired position.
o Set the temperature control to "Cool". ("Cool"

provides maximum cooling. The tempera-
ture may be moderated by moving the con-
trol toward "Warm".)

B740B02GK-AAT

Air Conditioning Operation
Cooling

OGK016704N

o Adjust the fan control to the desired speed.

For greater cooling, turn the fan control to
one of the higher speeds or temporarily
select the recirculate (

) position on the

air intake control switch.

B740C01GKA-AAT

Dehumidified Heating

For dehumidified heating:

o Adjust the air flow control to the desired

position.

o Turn on the air conditioning switch. The air

conditioning indicator light should come on at
the same time.

o Set the air intake control switch to the fresh

air (

) position.

o Set the air flow control to the face (

)

position.

o Adjust the fan control to the desired speed.
o For more rapid action, set the fan at one of

the higher speeds.

o Adjust the temperature control to provide the

desired amount of warmth.

OGK016705N

gkflhma-1b.p65

9/12/2006, 3:19 PM

Summary of Contents for 2007 Tiburon














































































































































































































































































Search results

Summary of Contents for 2007 Tiburon

Reviews:

Related manuals for 2007 Tiburon

Brands by name

Popular brands

Hyundai 2007 Tiburon, Owner'S Manual

Search results

Summary of Contents for 2007 Tiburon

Reviews:

Related manuals for 2007 Tiburon

Brands by name

Popular brands