manualshive.com logo in svg

Hyundai 2007 Tiburon, Owner'S Manual

The Hyundai 2007 Tiburon is a sleek and stylish sports coupe, featuring a powerful engine and a range of exciting features. Explore its Brochure & Specs to discover its impressive performance, technology, and design aspects. Download the manual for free from manualshive.com to unleash the full potential of this extraordinary vehicle.

Share
Download
background image

3

WHAT TO DO IN AN EMERGENCY

7

!

WARNING:

Significantly low tire pressure makes
the vehicle unstable and can contrib-
ute to loss of vehicle control and
increased braking distances.
Continued driving on low pressure
tires will cause the tires to overheat
and fail.

TPMS (Tire pressure monitoring
system) malfunction telltale

The TPMS malfunction indicator turns
on and stays on when there is a problem
with the Tire Pressure Monitoring Sys-
tem. If the system is able to correctly
detect an under-inflation warning at the
same time as system failure then it will
illuminate both the TPMS malfunction
and the low tire pressure telltale e.g. if
Front Left sensor fails, the TPMS mal-
function indicator turns, but if Front
Right, Rear Left, or Rear Right tire is
under-inflated, the low tire pressure tell-

tale may turn on at the same time as the
TPMS malfunction indicator.
Have the system checked by an autho-
rized Hyundai dealer as soon as pos-
sible to determine the cause of the
problem.

NOTE:
o The TPMS malfunction indicator

may be illuminated if the vehicle
is operated in areas close to elec-
tric power supply cables or radio
transmitters such as near police
stations, government and public
offices, broadcasting stations,
military installations, airports, or
transmitting towers, etc. which can
interfere with normal operation of
the Tire Pressure Monitoring Sys-
tem (TPMS).

o The TPMS malfunction indicator

may be illuminated if some elec-
tronic devices, such as notebook
computers, are used in the ve-
hicle. This can interfere with nor-
mal operation of the Tire Pressure
Monitoring System (TPMS).

o If there is a failed tire sensor, it is

possible for the TPMS to tempo-
rarily learn a replacement sensor
if closely driven to another vehicle
that is also equipped with TPMS.
In rare cases, this may tempo-
rarily delay the TPMS malfunction
indicator from turning on.

Changing a tire with TPMS

If you have a flat tire, the Low Tire
Pressure telltale will turn on. Have the
flat tire repaired by an authorized Hyundai
dealer as soon as possible or replace
the flat tire with the temporary spare
tire. NEVER use a puncture-repairing
agent to repair and/or inflate a low
pressure tire. If used, you will have to
replace the tire pressure sensor.
Each wheel is equipped with a tire
pressure sensor mounted inside the tire
behind the valve stem. You must use
TPMS specific wheels. It is recom-
mended that you always have your tires
serviced by an authorized Hyundai dealer
as soon as possible.

gkflhma-3.p65

9/12/2006, 3:21 PM

7

Summary of Contents for 2007 Tiburon














































































































































































































































































Reviews:

No comments

Related manuals for 2007 Tiburon

hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
PAC RadioPRO 5 RP5-GM41 Quick Start Manual preview
RadioPRO 5 RP5-GM41
Brand: PAC Pages: 3
Camcar 40061 Fe Mounting Instructions preview
40061 Fe
Brand: Camcar Pages: 2
CITROEN PICASSO XSARA DESIRE 1.6 - MESUREMENT Manual preview
PICASSO XSARA DESIRE 1.6 - MESUREMENT
Brand: CITROEN Pages: 2
GMC Envoy XUV 2004 Getting To Know Manual preview
Envoy XUV 2004
Brand: GMC Pages: 20
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
Volvo 2006 XC70 Owner'S Manual preview
2006 XC70
Brand: Volvo Pages: 211
SilverLeaf Electronics VMS 645 CL Owner'S Manual preview
VMS 645 CL
Brand: SilverLeaf Electronics Pages: 16
TEINHOF V-295 Fitting And Operation Manual preview
V-295
Brand: TEINHOF Pages: 2
Westin 28-0160 Instructions preview
28-0160
Brand: Westin Pages: 3
Gentex Full Display Mirror Installation Instructions Manual preview
Full Display Mirror
Brand: Gentex Pages: 18
Jeep 2014 All vehicles Warranty Information Booklet preview
2014 All vehicles
Brand: Jeep Pages: 44
Honda 2007 Pilot Installation Instructions Manual preview
2007 Pilot
Brand: Honda Pages: 7
Chevrolet El Camino 1983 Owner'S Manual preview
El Camino 1983
Brand: Chevrolet Pages: 103
Peak PKC0BJ Owner'S Manual preview
PKC0BJ
Brand: Peak Pages: 8
Renault Kangoo Manual preview
Kangoo
Brand: Renault Pages: 239
Discount Car Stereo A2DIY-CHRY Installation Manual preview
A2DIY-CHRY
Brand: Discount Car Stereo Pages: 5
Toyota 2012 CAMRY LE Emergency Response Manual preview
2012 CAMRY LE
Brand: Toyota Pages: 31

Brands by name

Popular brands

Load more brands