Hyundai 2007 Tiburon Owner'S Manual Download Page 68

Page: 68 / 269

FEATURES OF YOUR HYUNDAI

1. Distance to Empty

o This mode provides the estimated distance

to empty from the current fuel level in the fuel
tank.

o The trip computer may not register additional

fuel if less than 1.36 gallons (6 liters) of fuel
are added to the vehicle.

o When the battery has been reinstalled after

being discharged or disconnected, drive
more than 20 miles (32km) for an accurate
distance to empty.

OGK016401N

Type A

Type B

o When the distance to empty is less than 31

miles (50 km), the symbol will always come
on and the distance to empty digits will
indicate "---" with flash until more fuel is
added.

NOTE:

o The distance to empty can differ from

the actual tripmeter according to driving
conditions.

o The distance to empty can vary accord-

ing to the driving conditions, driving
pattern or vehicle speed.

OGK016402N

Type A

Type B

2. Average Speed

o This mode indicates the average speed

travelled since the last average speed reset.

o To reset the average speed to zero, press

and hold the reset switch for more than 1
second while the average speed is being
displayed.

OGK046033N

Type A

Type B

gkflhma-1a.p65

9/12/2006, 3:16 PM

Summary of Contents for 2007 Tiburon














































































































































































































































































Search results

Summary of Contents for 2007 Tiburon

Reviews:

Related manuals for 2007 Tiburon

Brands by name

Popular brands

Hyundai 2007 Tiburon, Owner'S Manual

Search results

Summary of Contents for 2007 Tiburon

Reviews:

Related manuals for 2007 Tiburon

Brands by name

Popular brands