APPEARANCE CARE
4-2
oxidization of the aluminium wheel will occur,
spoiling the appearance.
The use of an a toothbrush will facilitate cleaning
between the wheel "spokes".
SE040B1-E
STAIN/SPOT REMOVAL
Should tree sap, dead insects or tar prove to be
difficult to remove from the paint film, turpentine
or a proprietary paint cutting compound may be
used. Ensure that the area to be cleaned is not
rubbed intensively to prevent breaking through
the colour coat and exposing the under coat.
SE040C1-E
POLISHING
The exterior paint work should be polished with
a proprietary wax polish when water no longer
collects in bead form on the paint work. The
instructions of the product manufacturer should
be adhered to.
SE040E1-E
BUMPER MAINTENANCE
The special material from which the bumpers are
manufactured warrants special attention to pre-
serve the appearance of the bumpers. Avoid
contact with battery electrolyte or brake fluid and
ensure that accidental spillages are immediately
flushed with water.
Do not use abrasive cleaning materials which
may damage the bumpers.
SE040F1-E
ACCIDENT REPAIRS
In the event of the body work sustaining damage,
the following points should be noted prior to
repairs being undertaken.
If body panels are replaced or repaired, anti
corrosion treatment must be applied to the repair
area. The product used must be compatible with
those used in manufacture. It is recommended
that repairs are entrusted to a Hyundai dealer to
ensure that replacement parts used are of the
same high quality as those used in manufacture
of the vehicle and that the correct repair methods
and materials will ensure adequate levels of
corrosion protection and the continued validity of
the Anti Perforation Warranty.
SE050A1-E
INTERIOR
During the winter period, it is possible that the
passenger compartment flooring may become
wet from damp footwear or quantities of snow
adhering to footwear. The carpet should not be
allowed to remain in this condition since the
carpet may begin to create musty smells and will
promote corrosion of the floor pan in addition to
the carpet and under felt beginning to rot.
SE050C1-E
INTERIOR VALETING
The soft trim and carpets should be maintained
with the regular use of a vacuum cleaner. Heavy
soiling should be removed with a dry cleaning
agent recommended for this purpose following
the instructions of the product manufacturer.
Paint thinner, solvents or other such cleaning
materials should not be used since damage to
the upholstery may result.
SE050D1-E
SEAT BELTS
Seat belts should be cleaned only with a mild
soap solution. Strong detergents, solvens or
bleaches may damage the belt webbing and
therefore reduce the effectiveness of the belt.
Belts which display signs of fraying, wear of cut
should be replaced.
SE050E1-E
WINDOWS
A proprietary glass cleaner should be used to
clean the inside of the windows. However, the
rear heated windscreen must only be cleaned
using a light horizontal cleaning action. Care
should be exercised to avoid the use of abrasive
cleaners or contact with items of jewellery which
may damage the heating elements.
Avoid subjecting the bumpers to high tempera-
tures such as may be encountered in high bake
paint ovens.
