FEATURES OF YOUR HYUNDAI
1- 33
To operate the headlights, turn the barrel on the
end of the multi-function switch. The first position
turns on the parking lights, sidelights, tail lights
and instrument panel lights. The second position
turns on the headlights.
NOTE:
The ignition must be in the "ON" position to
turn on the headlights.
Parking light auto cut (If installed)
If you do not turn the parking lights "OFF" after
driving, the parking lights will automatically shut
"OFF" when the driver's door is opened.
To turn them "ON" again, you must simply turn
the ignition key to the "ON" position.
Instantaneous Fuel Consumption gauge
It shows instantaneous fuel consumption ac-
cording to the driving condition. The more indi-
cated figure is low, the more it indicates efficient
driving situation.
Volt gauge
It shows moment volt change and makes for
diver correspond to low volt situation.
HGK231
B340B01A-AAT
Lane Change Signal
To indicate a lane change, move the lever up or
down to a point where it begins flashing.
B340C03E-AAT
Headlight Switch
HGK038
HGK039
B340A01A-AAT
COMBINATION TURN SIGNAL,
HEADLIGHT AND HIGH-BEAM
SWITCH
Turn Signal Operation
Pulling down on the lever causes the turn signals
on the left side of the car to blink. Pushing
upwards on the lever causes the turn signals on
the right side of the car to blink. As the turn is
completed, the lever will automatically return to
the center position and turn off the turn signals at
the same time. If either turn signal indicator light
blinks more rapidly than usual, goes on but does
not blink, or does not go on at all, there is a
malfunction in the system. Check for a burned-
out fuse or bulb or see your Hyundai dealer.
The lever will automatically return to the center
position when released.