CONTROLS AND EQUIPMENT
1- 6
B050A01GK-AAT
DOOR WINDOWS
Power window (Not all models)
HGK096-D
(1)
HGK097-D
The power windows operate only when the igni-
tion key is in the "ON" position. The main switches
are located on the driver's arm rest and control
the front windows on the respective sides of the
vehicle. The windows may be opened by de-
pressing the front portion of the switch. To stop at
the desired opening, release the switch. The
window may be closed by pulling the front portion
of the switch. In order to prevent operation of the
passenger front window by passenger, a window
lock switch (1) is provided on the arm rest of the
driver's door. To disable the passenger's power
window, push the window lock switch. To revert
to normal operation, push in on the window lock
switch again.
CAUTION:
Never try to operate the main switch and sub-
switch in opposing directions at the same
time. If this is done, the window will stop and
cannot be opened or closed.
Auto-Down Window (Driver's Side)
(Not all models)
The Auto-Down window is moved to its fully open
position by pushing the switch, and to stop at the
desired position push in on the switch again.
2. Remove the old battery from the case and
note the polarity. Make sure the polarity of the
new battery is the same(+side facing down),
then insert it in the transmitter.
NOTE:
Install a new battery within 30 seconds after
remove the old one, if installing a new battery
takes more than 30 seconds, take the follow-
ing steps.
1) Turn the ignition key to the "ACC" posi-
tion.
2) Make sure that the turn signal lights blink
once by pushing the "LOCK" or "UN-
LOCK" button on the transmitter.
HGK121
Battery