CONTROLS AND EQUIPMENT
1- 35
SB230B1-E
VARIABLE INTERMITTENT WIPE
FACILITY (Not all models)
B350A01GK-EAT
WINDSCREEN WIPER/WASHER
SWITCH
The windscreen wiper switch, dependent upon
model, has three operating positions.
1. Intermittent wiper operation. (Not all models)
2. Low speed operation.
3. High speed operation.
NOTE:
To prevent damage to the wiper system, do
not attempt to wipe away heavy accumula-
tions of snow or ice.
Accumulated snow and ice should be re-
moved manually. If there is only a light layer
of snow or ice, operate the heater in the
defrost mode to melt the snow or ice before
using the wiper.
The variable intermittent wipe facility is operated
by moving the windscreen wiper switch to the
first position. The time period between wipes is
adjusted by moving the rotary control on the
windscreen wiper switch barrel.
B350B01O-EAT
WINDSCREEN WASHER
OPERATION
To use the windscreen washer, pull the wiper/
washer lever toward the steering wheel. When
the washers are operated, the wipers automati-
cally make two passes across the windscreen.
The washers continue to operate until the lever is
held at the washer position.
NOTE:
o Do not operate the washers for more than
15 seconds continuously or when the flu-
id reservoir is empty.
HGK042-D
(1)
(2)
(3)
HGK043-D
Mist Wiper Operation
HGK045-D
If a single wipe is desired in mist, move the
windscreen wiper and washer control lever up.
HGK044-D
