VEHICLE MAINTENANCE REQUIREMENTS
5-5
6ZF060D1-A
o Fuel lines, fuel hoses and connec-
tions
Check the fuel lines, fuel hoses and connections
for leakage and damage. Replace any damaged
or leaking parts immediately.
6ZF060E1-A
o Timing belt
Inspect all parts related to the timing belt for
damage and deformation. Replace any dam-
aged parts immediately.
6ZF060G1-A
o Vapour hose and fuel filler cap
The vapor hose and fuel filler cap should be
inspected at those intervals specified in the main-
tenance schedule. Make sure that a new vapour
hose or fuel filler cap is correctly replaced.
6ZF060F1-A
o Vacuum, crankcase
ventilation hoses
Inspect the surface of hoses for evidence of heat
and/or mechanical damage. Hard and brittle rub-
ber, cracking, tears, cuts, abrasions, and exces-
sive swelling indicate deterioration. Particular
attention should be paid to examining those hose
surfaces nearest to high heat sources, such as
the exhaust manifold.
Inspect the hose routing to assure that the hoses
do not come in contact with any heat source,
sharp edges or moving component which might
cause heat damage or mechanical wear. Inspect
all hose connections, such as clamps and cou-
plings, to make sure they are secure, and that no
leaks are present. Hoses should be replaced
immediately if there is any evidence of deteriora-
tion or damage.
6ZF060H1-A
o Air cleaner filter
A Genuine Hyundai air cleaner filter is recom-
mended when the filter is replaced.
6ZF060J1-A
o Spark plugs
Make sure to install new spark plugs of the
correct heat range.
6ZF060A1-A
EXPLANATION OF SCHEDULED
MAINTENANCE ITEMS
6ZF060M1-A
o Engine oil and filter
The engine oil and filter should be changed at the
intervals specified in the maintenance schedule.
If the car is being driven in severe conditions,
more frequent oil and filter changes are required.
6ZF060B2-A
o Drive belts
Inspect all drive belts for evidence of cuts, cracks,
excessive wear or oil saturation and replace if
necessary. Drive belts should be checked peri-
odically for proper tension and adjusted as nec-
essary.
6ZF060C1-A
o Fuel filter
A clogged filter can limit the speed at which the
vehicle may be driven, damage the emission
system and cause hard starting. If an excessive
amount of foreign matter accumulates in the fuel
tank, the filter may require replacement more
frequently.
After installing a new filter, run the engine for
several minutes, and check for leaks at the
connections.
F060N02E-EAT
o Valve Clearance
Inspect excessive valve noise and/or engine
vibration and adjust if necessary. A qualified
technician should perform the operation.
