Full Outdoor 2+0 XPIC IP Link
Page 5 of 39
Version
1.0
Connector
Description
SFP1
1x 1000BaseSX/Lx (SFP);primary SFP port for user traffic connection.
SFP2
1x 1000BaseSX/Lx (SFP);secondary SFP port for user traffic connection.
LAN1
1x 100/1000BaseT (RJ45); primary LAN port for user traffic connection. The
priority based on ETH channel can be set in GUI or from the command line.
LAN2+POE
1x 100/1000BaseT (RJ45);
secondary LAN port for user traffic connection. This port is also dedicated for
MNG through internal switch for separate IP access to AOU unit.
A T the same time this port could be used for powering up of AOU unit over
POE according to the standard LTPoE++ 90W.
All of 8 pins on the connector must be used.
(pins 1,2,7,8 – one polarity; pins 3,6,4,5 – the opposite polarity) Pin polarity
can NOT be mixed.
The priority based on ETH channel can be set in GUI or from the command
line.
DC-IN
-48VDC;
separate power supply connector.
QSE (IQ) connector
QSE connector for connecting SPU to RF part. For the QSE connector pinout
see the specification in section SPU-RFU interconnection.
USB MNG (DEVICE)
MINI USB
interface for an alternative IP access.
Pin configuration according to the standard MINI USB.
www.hypercable.fr www.e-rake.fr