Full Outdoor 2+0 XPIC IP Link
Page 16 of 39
Version
1.0
Status bar
This section informs the user about status of ongoing actions.
Content frame
This area changes depending on the selected page. It contains various informational and functional ele-
ments. Moreover most segments of the web GUI have little index mark next to them which show built-in
help informations related to such segment upon clicking.
4.2
General
4.2.1
Status
This is the front page of the GUI interface seen immediately after successful login. It is divided into two sec-
tions:
•
RADIO STATUS
•
SYSTEM INFO
These section gives the user the most important summary of link parameters and condition.
4.2.2
Mode
The
Mode
is definition of device role in the link. This page is divided into two sections:
MODEM MODE
Selection of the desired mode. Content of this menu depends on available system modes defined in the de-
vice license. Please note that it is recommended to save configuration and reboot the device after
Mode
change. The available modes are:
•
end unit dual: both channels will be used
•
end unit 1/2 : only the selected channel will be used
•
aggregation: port aggregation mode
AGGREGATION CONFIG
When the aggregation mode is active a second section of the
Mode
page will appear. This section serves as
configuration of the selected
Mode
. This section also provides a basic overview of the selected
Mode
condi-
tion. Only settings related to the selected
Mode
will be listed. The
AGGREGATION Mode
consists of the fol-
lowing options:
•
AUTO – Data to both: The standard aggregation configuration. With this option selected the device
automatically checks if both A and B channels are operable and will use only operable channels for the
transmission.
•
TX1/2 – Data to modem 1/2: By this option you can force the IDU to send all data through particu-
lar channel. This can be useful when you are diagnosing problems in the link such as accidental data drops,
during maintenance and so on.
www.hypercable.fr www.e-rake.fr