Page 52
»
Remove and open cylinder, as described in Section 8.3
"Removing and Cleaning Steam Cylinder."
»
Loosen knurled nuts (5) and remove electrodes (48).
»
Install new electrodes and hand tighten the nuts.
Use solvent-free, HygroMatik-quality o-rings (for flange, cylinder
base and steam hose adapter).
»
Assemble steam cylinder and place it into cylinder
»
Connect plugs (4) directly to the electrodes (48) (with
gray, red and black knurled nuts). It is not necessary to
detach the knurled nuts!
Warning:
The plug must be pressed down onto the electrode as
far as it will go.
Note:
Connect plugs to the correct electrodes. Pay attention to
the color of the knurled nut.
