Fault Finding 10
28
ST16135-00C
10.6 Diagnostic Menu P06
The menu structure allows a technician to check and test all the
inputs and outputs to the Controller individually without running
the compressor.
10.7 Configuration Menu P07
Basic operating configuration settings are applied to the
compressor that control starting characteristics and pressure load
and unload features with associated time delays
10.8 Speed Regulation Menu P08
This function controls response of the variable speed drive to
ensure smooth speed changes and maintain a steady target/load
pressure.
10.9 Calibration Menu P09
Pressure sensors must be set to atmospheric pressure with the
Controller pressure display set to zero. Range calibration must be
accurately applied to achieve correct performance and pressure
related safety functions.
10.10 Access Level Configuration Menu P10
Special functions and settings that determine compressor specific
configuration generally set once during factory default settings
and site commissioning.
10.11 RS Motor Map Menu P12
Motor control features are set as factory defaults that maintain
operation within safe limits.
10.12 RS Inverter Drive Map Menu P13
Parameters are set as factory defaults to match the inverter drive
type and controlling features for variable speed operation.
If, for any reason, you feel unsure about fault rectification, or any
service aspect relating to your Hydrovane compressor, please
contact your nearest Hydrovane Distributor.