MultiSystem 5060
Operating Instructions Manual
© Hydrotechnik GmbH • All rights reserved
Rev. 1.8/120307EN
Page 32 of 55
Function „Channel numeration“
As a standard, the MS 5060 numerates all channels with a letter and
an index number. If three pressure sensors are connected, the chan-
nels will be numerated as p1, p2 and p3 automatically. If you now
connect e.g. a temperature sensors instead of p1, this channel will be
numerated as t1. The two other channels will be renamed, p2 will be-
come p1 and p3 will become p2.
By setting the function “Numeration ch.” from “AUTO” to “MANUAL”,
you can assign fixed index numbers to the channels (see section 6.3.1
on page 20). These will remain even after the channel occupation has
changed. In the example shown above the three channels would be
numerated as t1, p2 and p3. Highlight the function with and press
to toggle between AUTO and MANUAL.
Submenu "Lock menus"
After opening the submenu, you first have to define the release code:
1. Start release code definition:
2. Enter release code; you can use the function keys:
HELP: opens a help screen for the alphanumeric entry
abcd: toggles between the entry of capital and small letters
DEL: deletes the last entered digit
INSERT: inserts a digit in front of the flashing digit
DELETE: deletes all digits of the release code
3. Confirm release code:
4. Use to highlight the displayed menus.
5. Press
to toggle between "–" (menu released) and "LOCKED";
the entry of the release code is required to open locked menus.
6. Press
to confirm the entries and leave the submenu.
6.6.15
Display software information
When calling the Hydrotechnik customer service department, you
should have the required information available. These are contained
on the information screen:
1. Display information:
2. Display desired
information:
3. Leave
function:
When you highlight the item "Revision", additional information is dis-
played after a short period of time.
6.7 Submenu
„Projects“
Use this menu to save complete parameter sets of the instrument (=
projects). You may save up to five different projects and load them at
any time.
Save a new project
1. Open project menu:
2. Start
saving:
3. Enter project name:
...
– use
to toggle between
capital and small letters.
4. Save
project:
5. Leave
function:
Load the saved project if you want to use it.