MultiSystem 5060
Operating Instructions Manual
© Hydrotechnik GmbH • All rights reserved
Rev. 1.8/120307EN
Page 30 of 55
6.6.10 Select
keyboard
Here you can select whether the short-cut method for the menu opera-
tion (COMFORT) shall be activated. Then you do not need to highlight
functions with the arrow keys and select them with Enter, but can
press the assigned number key. E.g. if you press 4 in the main menu,
the device menu will be opened instantly.
1. Open
function:
2. Select keyboard function:
3. Confirm changes and leave function:
6.6.11
Set service function
Here you can set the amount of information that shall be contained in
the service report of the instrument. "OVERVIEW" contains the most
important settings and parameters, "DETAIL" contains additional in-
formation for the service case.
1. Open
function:
2. Select report type:
3. Confirm changes and leave function:
During the item "Service" is highlightes, you can press
to print the
service information.
6.6.12
Set RS232 interface speed
If you want to use the RS232 interface (e.g. to connect an external
measuring device, Multimeter), you can set the data transmission
speed here:
1. Select
function:
2. Select
speed:
3. Confirm changes and leave function:
6.6.13
Set Ethernet functionality
If you want to use an Ethernet network module connected to the
RS232 port, you can define the required settings here:
1. Display the Ethernet options:
2. Select the option to be set:
3. Select the desired setting or enter the required information.
4. Confirm the setting/entry:
5. Confirm changes and leave function:
These options can be set:
Module select
whether an Ethernetmodule is connected (YES)
or not
IP
enter the IP-address that the MultiSystem 5060 shall
have in the Ethernet network
Port
enter the communication port of your Ethernet network
Password
enter the password for the Ethernet network, if a pass-
word is required