P a g e
3 | 38
Preface
Thank you for the purchase of our HydroWELL
®
UV disinfection system.
Our systems are constructed and manufactured with respect to and in consideration of all
current standards as well as further technical specifications and corresponds to the latest
state-of-the-art technology, allowing for maximum safety under all operating conditions.
System safety can only be assured if all necessary measures are taken beforehand. It is part
of the operator‘s diligence to plan and monitor such measures and implement them with due
care.
Special care should be taken with respect to hygiene during operation and maintenance
where the plant is used in the food industry.
The operation and maintenance manual includes important information necessary for the
correct and successful installation and operation. You should be familiar with all details prior
to operating the unit.
For any further information or if you are confronted with any problems, please contact our
service and technical staff.
Contact
Hydrotec (UK) Ltd
Hydrotec House
5 Manor Courtyard, Hughenden Avenue
High Wycombe, Bucks HP13 5RE
Tel.: 01494 796 040
Fax: 01494 796 049
email: [email protected]
Summary of Contents for HYDROWELL Compact 10E
Page 16: ...P a g e 16 38 Reactor Dimensional drawing with parameters from technical data sheet...
Page 18: ...P a g e 18 38 Control Box Power switch ON OFF UV monitor Cable fittings...
Page 30: ...P a g e 30 38 Appendices 1 Installation Schematic UV Disinfection System...
Page 31: ...P a g e 31 38 Appendices 2 Wiring diagram HydroWELL 2 E 5 E and 10 E with sensor...
