P a g e
20 | 38
The related control must be mounted on a wall or a rigid surface. It shall be mounted on eye level and
next to the reactor, within the reach of cables provided. A permanent power connection via a
switchable fused spur (230V/1pH/50Hz; 5A) must be provided in close vicinity to the system.
ATTENTION:
Electrical connections must only be done by an authorised expert according to VDE
requirements! All works must be done only by authorised and instructed experts.
Summary of Contents for HYDROWELL Compact 10E
Page 16: ...P a g e 16 38 Reactor Dimensional drawing with parameters from technical data sheet...
Page 18: ...P a g e 18 38 Control Box Power switch ON OFF UV monitor Cable fittings...
Page 30: ...P a g e 30 38 Appendices 1 Installation Schematic UV Disinfection System...
Page 31: ...P a g e 31 38 Appendices 2 Wiring diagram HydroWELL 2 E 5 E and 10 E with sensor...
