6/98
Last change 10/2018 E-P | Subject to technical modifications
2.2 Appropriate use
The system is manufactured to the latest German technical safety standards employing the latest
state-of-the-art technology.
If incorrectly treated, not maintained properly at regular intervals or not used for the correct purpose
according to the specifications, the softener may incur risks and/or damage.
Operation of system shall be within the technical parameters and limit values in chapter
III
.
The softener unit is to be operated and maintained in good working order and according to the
specification it was designed for only.
Important!
Any other use of the system, other than described, is deemed to be not in
accordance with the specification.
The manufacturer / supplier does not accept any liability resulting from the
improper use of the system. Such risks are borne by the operator alone.
All regulations and instructions in the operating and maintenance manual and
such regulations as are applicable locally must be strictly adhered to.
Any malfunctions must be corrected immediately.
2.3 Basic safety measures
Prior to starting the system it must be guaranteed that:
-
No-one can suffer injury due to the system operation
-
All safety facilities are in a perfectly serviceable condition
The system must be operated in perfect condition only. All faults must be notified to the person
responsible immediately after being noticed.
In order to avoid flooding of installation site, there is a drainage and / or leak control with alarm to be
provided locally.
