34/98
Last change 10/2018 E-P | Subject to technical modifications
Connection water flow meter
HYDRO
ION
®
VAS
– CS 1
The water meter is firmly installed in the soft water
output of the valve in case of control valves 1” and
is electrically connected to the pcb by means of
plug cable (see figure 18).
HYDRO
ION
®
VAS
– CS 1,5
HYDRO
ION
®
VAS
– CS 2
The water meter is installed in the output of the soft
water line in case of control valves 1.5
“ and 2“.
Electrical connection is realized by means of plug
cable at the control valve.
All work at electrical equipment of the softener shall be
carried out by an authorized expert only!
Note!
Since there is the risk of germ formation, it is recommended to disinfect the softener after
vessel filling and short before commissioning.
Water meter
Control valve
fig.24
