HYDAC FILTER SYSTEMS GMBH
Product and technical specifications | 3
BeWa OF5 CM 3580053c en-us print
21 / 80
3.1 Proper/designated use
Use the filter unit only for the application described in the fol-
lowing.
The filter unit is used in combination with the permitted filter el-
ements (identification -
) to clean / filter hydraulic and lubri-
cating oils in the bypass flow or to fill the hydraulic systems, to
transfer as well as drain the hydraulic tanks.
Proper or designated use of the product extends to the follow-
ing:
– Note the permitted operating conditions and permitted op-
.
– Observing all instructions in the instruction manual.
– Performing inspection and maintenance work.
NOTICE
Impermissible operating conditions or operating media
The product will be damaged.
u
Ensure use of permissible operating media.
u
Note the permissible operating conditions.
Personnel who work with the product must be aware of the
dangers involved in handling it, must be over 14 years of age
and must be without any physical impediments in regard to the
industrial environment.
Claims for defects or liability – regardless of the legal founda-
tion – do not apply with incorrect or improper installation, com-
missioning, usage, handling, storage, maintenance, repair, use
of unsuitable components or other circumstances for which the
manufacturer is not responsible.
The manufacturer assumes no responsibility for determining
the interfaces for installation in a system or the installation, use
or functionality of the product in this system.
1
2
3
4
5
6
7
8
9