6 | Operation
HYDAC FILTER SYSTEMS GMBH
54 / 80
BeWa OF5 CM 3580053c en-us print
ü
Select the right filter element for an operating mode and
exchange this according to the chapter Changing the fil-
ter element.
10.
Connect the suction hose to the oil tank/container and fit
the suction hose in it and also secure it against falling
out.
11.
Connect the pressure hose to the oil tank/container and
fit the pressure hose in it and also secure it against fall-
ing out.
12.
Connect the filter unit to the voltage source.
13.
Switch the filter unit on at the main switch.
14.
Keep an eye on the display of the
ContaminationSensors with the respectively current
cleanliness class.
15.
If the display of the ContaminationSensors displays the
required or a better cleanliness class, switch the filter
unit off at the main switch.
ð
Filtration up to the required cleanliness class is com-
plete.
16.
Remove the pressure hose from the oil tank/container
and empty the contents back into the oil tank/container.
Wind the hose onto the hose retainer and insert the
lance into the holder.
17.
Remove the suction hose from the oil tank/container and
empty the contents back into the oil tank/container. Wind
the hose onto the hose retainer and insert the lance into
the holder.
18.
Secure the cable and, if required, the hoses to the filter
unit, see Transportation/storage.
O
The filter unit is ready for the next application.
1
2
3
4
5
6
7
8
9
