Intex Krystal Clear CS8220 Owner'S Manual Download

Page: 1 / 27

132A

English

(132) MODEL CS8220/8230 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/29/2013

OWNER’S

MANUAL

Krystal Clear™

Saltwater System

Model CS8220 220 - 230 V~,

Model CS8230 230 - 240 V~

IMPORTANT

SAFETY RULES

Read, understand, and follow

all instructions carefully before

installing and using this product.

Don’t forget to try these other fine Intex products: pools, pool

accessories, inflatable pools and in-home toys, airbeds and boats

available at fine retailers or visit our website.

Due to a policy of continuous product improvement, Intex

reserves the right to change specifications and appearance,

which may result in updates to the instruction manual without

notice.

For illustrative purposes only.

132-*A*-R0-1407

- Intex Recreation Corp.

Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/

Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans

certains pays sous licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen

verwendet in einigen Ländern der Welt in Lizenz von/

Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex

Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA

90801

• Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/

Vertrieb in der Europäischen Union durch/

Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands

www.intexcorp.com

Summary of Contents for Krystal Clear CS8220




























Search results

Summary of Contents for Krystal Clear CS8220

Reviews:

Related manuals for Krystal Clear CS8220

Brands by name

Popular brands

Intex Krystal Clear CS8220, Owner'S Manual

Search results

Summary of Contents for Krystal Clear CS8220

Reviews:

Related manuals for Krystal Clear CS8220

Brands by name

Popular brands