FCU 8000 series
FCU menus
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 77/112
BEWA FCU8000 3109776d en-us 2011-06-10.doc
2011-06-10
Set bus address
The standard setting is 1; this setting should not be changed.If several units
featuring DIN measurement bus interfaces (type code / - BUS) are connected to one
bus, a bus address between 1 and 31 has to be allocated to each unit. An address
may not be allocated twice.
setup
SETUP
Bus address
ok
start
Bus address:
1
or
Bus address:
3
ok
start
ok
start
Press this key to confirm the
operating mode selected and to
initiate measurement.
stop
Abort and exit.
Display operating hours
The operating hours of the unit are displayed.
The operating hours meter only records the measurement time.
setup
SETUP
Operating hours
ok
start
Operating hours:
n h
ok
start
Press this key to confirm the
operating mode selected and to
initiate measurement.
stop
Abort and exit.
