FCU 8000 series
FCU menus
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 47/112
BEWA FCU8000 3109776d en-us 2011-06-10.doc
2011-06-10
Q
R
S
T
U
V
W
X
Y
Z
Insert character:
Press the
ok
start
+
keys simultaneously and a space
will be inserted in front of the character just marked.
Delete character:
Press the
ok
start
+
keys simultaneously and the
character just marked will be deleted from the measuring
point designation.
Setting the averaging interval
Entering an averaging interval enables the data quantity which accumulates during a
measurement to be reduced.
An averaging interval of > 0 min causes only the mean value of all measurements
completed within this interval to be saved and printed out.
The 0 min setting causes the averaging function to be deactivated. Each measured
value is immediately saved and printed out.
The values 0 ... 1440 minutes are possible for the averaging interval.
The current, non-averaged measured value is always shown in the FCU display.
memory
MEMORY 0,0
%
Averaging interval
ok
start
Averaging interval:
x [min]
Averaging interval:
x [min]
or
Averaging interval:
x [min]
ok
start
Confirm entries.
stop
Abort and exit without saving.
