FCU 8000 series
Safety information and instructions
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 10/112
BEWA FCU8000 3109776d en-us 2011-06-10.doc
2011-06-10
Safety information and instructions
These operating instructions contain the key instructions for properly and safely
operating the FCU.
Obligations and liability
The basic prerequisite for the safe and proper handling and operation of the FCU is
knowledge of the basic safety instructions and regulations.
These operating instructions in general, and the safety precautions in particular, are
to be adhered by all those who work with the FCU.
In addition, the accident prevention rules and regulation applicable at the location of
use are to be observed.
The FCU has been designed and constructed in accordance with the current state of
the art and recognized safety regulations. Nevertheless, hazards may be posed to
the life and limb of the individual using the product or to third parties. Risk of
damage may be posed to the product or other equipment and property.
Use the FCU:
Solely for its designated use
Only when in safe, perfect condition.
Immediately remedy any malfunctions that might impair safety.
Always keep the operating and maintenance instructions near the measurement
device.
In addition to the operating instructions, the general and local regulations on
accident prevention and environmental protection are to be made available and
observed.
Ensure that all information relating to safety and potential hazards of the FCU are
kept in a legible condition.Replace them if necessary. Replace them if necessary.
Check the hoses and connectors for leaks on a daily basis.
WARNING
Hydraulic systems are under pressure
Danger of bodily injury
►
Depressurize the system before performing any
work on it.
