Http://www.hybertone.com/en
VP-102 / VP-202 User Manual
29
Registrar. The standard port used is 5060. To specify a non-standard signaling port, add “:<port
number>” to the of the location. For example: If SIP Proxy = yousippbx.com, the signaling port is
the standard port 5060. If SIP Proxy = yoursippbx.com:15060, the signaling port is 15060.
5.
Registry Expiry(s)
– This specifies the expiry duration at the SIP Registrar after a successful
registration. The range is 60 to 36400 seconds.
6.
Outbound Proxy
– A network node acts as proxy for outbound traffic between a client and a
server. Please contact your network administration to determine if this proxy is available or not.
7.
Home Domain
– This field enables the use of home domain name is SIP registration instead of
IP address.
8.
Authentication ID
– This field specifies the ID to be used for Authentication during a SIP
registration.
9.
Password
–This field specifies the password used for Authentication during a SIP registration.
10.
Backup Server (For Model VP-102 only)
– The backup option provides settings for a SIP
backup server. Once the designated SIP Proxy and/ SIP Registrar fail, the backups will be used
automatically. Once the primary servers are up, the phone will switch back automatically.
11.
Call Waiting (For Model VP
-
202 only)
– This parameter enables or disables the Call Waiting
feature.
12.
Call Forward Type
– This defines the Call Forward condition and the available options are:
a)
Not Forward
– Call forward is disabled.
b)
Unconditional Forward
– Call is always forwarded.
c)
Busy Forward
– Call is forwarded when the line is in use / engaged.
d)
No Answer Forward
– Call is forwarded when it is not answered.
e)
Busy or No Answer Forward
– Call is forwarded when the line is in use or not answered.
13.
Forward Number
– This defines the number to be used for Call Forward.
14.
Voice-mail Number
– This defines the access code for the voice mail server when the
key
is pressed.
15.
Hotline (VP-202)
–
Hotline is a feature to dial out the preset number automatically whenever
the phone goes off hook. This feature for the corresponding line is enabled when a number is
entered. The Line 1 Hotline Number (if set) is dialed out since it is the default line to be used
when the phone is off hook. To dial the Line 2 Hotline Number, press the L2 key directly.