Hybertone VP-102, User Manual

Page: 20 / 50

Http://www.hybertone.com/en VP-102 / VP-202 User Manual
20
f) Key(#) as Delimiter – When dialing a VoIP number, the VoIP device needs to wait for the user to
complete the number dialing before the call request is actually sent to the server. This parameter
enables or disables the “#” key to be used to signal the number dialing is completed and the call
request can be execute immediately.
g)
Phone Book (for Model VP-202 only) – This parameter specifies if the phone should use one
phone book (Global mode) for both lines or an individual phone book for each line (By Line mode).
h)
Network Tones – This parameter defines the network tones to be used. The predefined
networks tones are: China , Hong Kong , Taiwan , New Zealand , United Kingdom , United
States , Korea, Slovenia , Czechoslovakia , India , Singapore , Israel , Malaysia , Indonesia ,
Thailand , Romania , Bangladesh , and Customized . The Customized option allows user to
define his own network tones. If the desired network tones selection is not available, user can
use this
Customized option.
Each network tone is defined as
nc, rpt, c1on, c1off, c2on, c2off, c3on, c3off, f1, f2, f3, f4, p1, p2, p3, p4
where
nc is the number of cadences
rpt is the repeat counter(0 - infinite, 1~n - repeat 1~n times)
c1on is the cadence one on duration (in milliseconds)
c1off is cadence one off duration (in milliseconds)
c2on is the cadence two on duration (in milliseconds)
c2off is the cadence two off duration (in milliseconds)
c3on is the cadence three on duration (in milliseconds)
c3off is the cadence three off duration (in milliseconds)
f1 is the tone #1, 300-3000(Hz)