Http://www.hybertone.com/en
VP-102 / VP-202 User Manual
23
More advanced parameters for
802.1q VLAN
and
MAC
settings are available. Please consult your
network administrator for assistance if needed.
PC PORT
– The PC port is intended to provide an Ethernet connection to other network devices (for
example: PC, network HUB.). Two modes of operation are available:
1.
Bridge mode
- This mode allows the network traffics at the PC port to be bypassed to LAN port.
This means that the network device share the same network segment as the LAN port. There is
no IP address assigned to the PC port.
2.
Fixed IP
- This mode sets the PC port
IP Addresss
(private IP) and
Subnet Mask
manually.
This creates a new network segment for the network devices connected to the PC Port.
To simplify network IP assignments, enable the DHCP Server for the PC Port. This allows
network devices connected Port to obtain network IP and related information from the PC Port.
Please consult your network administrator for proper settings of the DHCP Server
2.4.3 Call Settings
This page configures all related settings for VoIP Service. Based on the two protocols (H.323 and
SIP) supported, the operation of HT-812P is divided as two
Endpoint Types
:
H.323 Phone
and
SIP
Phone
. Some of the parameters are unique to the
Endpoint Type
and are described separately
below.
REMARK:
Model VP-102 supports only one SIP registration (1 Line).
Model VP-202 supports two SIP registrations (2 Lines).
