Http://www.hybertone.com/en
VP-102 / VP-202 User Manual
19
This page configures the general settings in the device:
Language
,
Time Zone
,
Time server
,
Time
Format, Auto-Provision
,
Key(#) as Delimiter
,
Phone Book Mode
,
Network Tones
,
Speaker
Phone Mic Input Gain
,
Central Management
.
a)
Language
- This field sets the language to be used for initial access to the built-in Web Server.
The languages currently available for selection are English and
简体中文
(Simplified Chinese).
Once the language change is saved, it does not take effect until a new access to the web server.
To change the display language immediately, you can select the language icon as shown below.
However, this does not change the default language.
b)
Time Zone
– This parameter specifies your local time zone in order for the date/time to be
correctly displayed since the date/time obtained from a network time server is referenced to the
Greenwich Mean Time (GMT). If your time zone is 8 hours ahead of the GMT, you need to enter
the value “GMT+8” in this field.
c)
Time Server
– This parameter specifies the location of the network time server for obtaining the
date and time information. It accepts both domain name and IP address.
d)
Time Format
– This parameter specifies the time display format on the LCD.
e)
Auto Provision
– This parameter enables or disables the Auto Provision procedures. The
Auto
Provision
is a batch script to obtain configuration and firmware upgrade information from a server.
Once this option is enabled, two additional parameters (
Provision Server
and
Provision Interval
)
are displayed. The
Provision Server
specifies the location of the designated provision server.
The auto provision procedure is executed at boot up time and is repeated at a duration specified
in the parameter
Provision Interval
.