Http://www.hybertone.com/en
VP-102 / VP-202 User Manual
38
2.4.5 .1 Online Upgrade
Click on the Online Upgrade tab to perform manual firmware upgrade. Enter the upgrade address
as shown below. Please contact your service provider to determine if there is a new firmware
available.
WARNING: Once the upgrade starts, a message window is displayed to show the upgrade
status. DO NOT TURN OFF THE POWER WHILE THE FIRMWARE UPGRADE IS IN PROCESS!
2.4.5 .2 Change Password
HT-812P supports two login levels to the built-in webpage. The User level is intended for general
user and is restricted from accessing the
Call Settings
page and
Reset Configuration
function. In
this level, only the password for the user level can be changed. The default password for the user
level (login ID = user) is “1234”.
The Administrator level allows full accessing to the HT-812P configurations. In this level, the
password for both levels can be change. The default password for the administrator level (login ID =
admin) is “admin”.
It is important to record the new password(s). If the admin password is lost, a special star command
is available to reset all system settings. Please refer to section 3.1.1 for more information.
