Http://www.hybertone.com/en
VP-102 / VP-202 User Manual
15
2
Web Configuration
2.1 Starting Up
Upon powering up for the first time, the VP-102 scans for available services for network
connections. It will then display the services available and prompt for user input.
1.
DHCP service – This means that a local DHCP host is detected. Select this service to enable the
phone to obtain IP address and related information for the LAN port from the DHCP host.
2.
PPPoE Dial Up – This service is intended for ADSL / Cable Modem user. Select this and the
phone will prompt for Username and Password for the PPPoE Dial Up.
3.
Fixed IP – When the above two services are not available, this method can be used to access the
network. When this option is chosen, the phone will prompt for IP Address, Gateway Address,
and Netmask. Please contact your network administrator or ISP if you do not have the
information required.
2.2 Obtaining the VoIP Phone IP Address
Once the LAN / PC port is setup properly, you are now ready to access the built-in web server for
phone configuration. To access the web server, you first need to retrieve the IP address using the
following steps:
1.
Press Menu (during on-hook or off-hook states)
2.
Press 3 to select System Tools
3.
Press 1 to select Phone Status
4.
Press 1 to select LAN Port or 2 to select PC Port
5.
Press 1 to select IP
The phone then displays LAN / PC port IP address:
xxx.xxx.xxx.xxx
