User Manual
Rev 9.0
Page 41
HV Diagnostics
Step
Procedure
(Reporting)
Example
R 8:
Station
(Extended only)
Specify station name
R 9:
Line Length
(Extended only)
Specify line length
•
Units correspond to “Distance Unit” set in
“Instrument Settings”
(see 4.3-Instrument Set-up)
R 10:
DUT size
(Extended only)
Specify DUT size
Typical entries include:
•
Conductor size for cable test
•
Horsepower or kW for motor test
R 11:
Manufacturer
(Extended only)
Specify manufacturer name
R 12:
Work Order
(Extended only)
Specify work order name
R 13:
Operator
(Extended only)
Specify operator name
End of reporting
procedure
Select Test Mode
•
To continue in
Manual Test Mode
: See 5.2
Steps MS 1-MS 5 - set test parameters
Steps MR 1-MR 6 - run test
•
To continue in
Automatic Test Mode
: See 5.3
Steps AS 1-AS 15 - configure sequence
Steps AR 1-AR 9 - run test
Viewing Report
Reports can be viewed directly on the HVA display screen. In “Reports &
Setup” the number of reports saved appears in parentheses following
Start New / Report Details
Station Name?
station BETA1
MAIN PREV
NEXT
DUT: 1.0kV Cable XLPE
Start New / Report Details
Line Length?
linelen 200 meter
MAIN PREV
NEXT
DUT: 1.0kV Cable XLPE
Start New / Report Details
Size of DUT?
size 4/0
MAIN PREV
NEXT
DUT: 1.0kV Cable XLPE
Start New / Report Details
Manufacturer Name?
manufacturer ABC
MAIN PREV
NEXT
DUT: 1.0kV Cable XLPE
Start New / Report Details
Work Order?
W.Order: WOO9A
MAIN PREV
NEXT
DUT: 1.0kV Cable XLPE
Start New / Report Details
Operator Name?
operator J.SMITH
MAIN PREV
NEXT
DUT: 1.0kV Cable XLPE
Start a New Test
Use an existing
Auto Test Sequence
or use Manual Mode?
Auto Seq.
Manual
MAIN PREV
