Huvitz HOCT-1, User Manual

Page: 9 / 155

HOCT-1/1F
2.1.
Usage Precautions
This equipment has been developed and tested in conformity with domestic & international safety standards and
regulations, which guarantees the high stability of this product. This guarantees a very high degree of safety for this
device. The legislator expects us to inform the user expressively about the safety aspects in dealing with the device.
The correct handling of this equipment is imperative for its safe operation. Therefore, please read carefully all
instructions before switching on this device. For more detailed information, please contact our Customer Service
Department or one of our authorized representatives.
For use of equipment in rated voltage less than 125Vac, minimum 6A, Type SJT or SVT, 18/3AWG, 10A, max
3.0m long: One end with Hospital Grade Type, NEMA 5-15P Other end with appliance coupler. For use of
equipment in rated voltage less than 250Vac, minimum 6A, Type SJT or SVT, 18/3AWG, 10A, max 3.0m long:
One end terminated with blade attachment plug(HAR) Type, NEMA 6-15P.
Use instrument that comply with IEC60601-1 in the patient environment. [The figure below show]
If and instrument that does not comply with IEC 60601-1 is to be used, use an isolation transformer.
If a person handling a conductive part of the system comes into contact with a patient at the same time, hazard
may occur due to leakage current exceeding the value specified in the applicable standard. Be careful not to touch
patients when connecting or removing the power plug or cable connectors.
!
CAUTION
!
CAUTION