Husqvarna Wacker Neuson CRT60-74LX, Operator'S Manual

Page: 95 / 136

wc_tx004003gb_FM10.fm
95
CRT60-74LX Diagnostic Trouble Codes (DTC)
9.3 List of Engine Diagnostic Trouble Codes (DTCs)
Error Code
Description
SPN FMI
27 7 EGR feed back/position sensor/Dynamic range failure (for CAN)
28 3 Accelerator pedal for ASC (PTO) sensor signal too high
28 4 Accelerator pedal for ASC (PTO) sensor signal too low
28 20 Accelerator pedal for ASC (PTO) sensor 2 signal too high
28 21 Accelerator pedal for ASC (PTO) sensor 2 signal too low
29 3 Accelerator pedal sensor No. 2 signal too high
29 4 Accelerator pedal sensor No. 2 signal too low
51 3 Intake throttle position signal too high
51 4 Intake throttle position signal too low
84 8 Vehicle speed sensor frequency too high
84 5 Vehicle speed sensor input open/ short
84 2 Vehicle speed sensor signal invalid
91 3 Accelerator pedal sensor No. 1 signal too high
91 4 Accelerator pedal sensor No. 1 signal too low
94 3 SCV(+) output short to BATT; SCV(-) output short to BATT
94 6 SCV(+) output open load/short to GND; SCV(-) output open load/short to GND;
SCV coil open/short
96 4 Fuel level sensor signal too low
96 3 Fuel level sensor signal too high
97 2 Water in fuel filter failure
100 1 Engine oil pressure down
102 3 Boost pressure sensor signal too high
102 4 Boost pressure sensor signal too low
102 2 Boost pressure sensor performance invalid
105 3 Air temperature sensor signal too high
105 4 Air temperature sensor signal too low
107 2 Air filter clogging error
107 3 Air filter differential pressure sensor signal too high
107 4 Air filter differential pressure sensor signal too low
108 3 Atmosphere pressure sensor signal too high