Husqvarna Wacker Neuson CRT60-74LX, Operator'S Manual

Page: 60 / 136

wc_tx004561gb.fm
60
Maintenance CRT60-74LX
6 Maintenance
6.1 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks

may be performed by the operator. Tasks designated with square bullet
points  require special training and equipment.
1
Service more often in dusty conditions.
2
Perform initially after first 50 hours of operation. Hydraulic oil filter is included with machine.
3
In hot climates exceeding 32°C (90°F), replace fluid and filter every 250 hours.
4
In climates below 32°C (90°F), replace fluid and filter every 500 hours.
Daily
Every
50
hours
Every
100
hours
Every
250
hours
Every
500
hours
Every
1000
hours
Grease trowel arms. 
Check hydraulic oil level.

Inspect air filter. 
Check external hardware.

Pressure wash all surfaces until free of concrete. 
Check for leaks around hydraulic hoses and
connections.

Lubricate wheel kit hydraulic cylinder.

Check wiring and electrical connections. 
Grease steering pivots.

Drain water from fuel/water separator.

Check for leaks around radiator hoses and hose
clamps.

Check condition of intake air line. 
Clean air cleaner element.
1

Remove sediment in fuel tank.

Clean radiator filler cap.

Replace hydraulic oil filter.
2, 3, 4
 
Replace hydraulic oil.
3, 4
 
Replace fuel line hose.

Replace air cleaner element.
1
Every year 
Change radiator coolant.
Every 2 years 