Husqvarna Wacker Neuson CRT60-74LX, Operator'S Manual

Page: 48 / 136

wc_tx003645gb_FM10.fm
48
Operation CRT60-74LX
5.8 Changing the Steering Mode
The steering mode button (u) allows the operator to change the response of the
joysticks depending upon the intended machine movement or concrete surface
condition. Press the steering mode button to change between the two response
modes. The instrument display screen shows either a
1 for high resolution mode or
a 2 for high rate mode.
Modes
u
t
wc_gr014516
Mode Machine response Recommended use
High Resolution This is the standard response mode.
In this mode, larger movements of
the joysticks are required to control
machine motion.
The LED
(t)
illuminates when in this
mode.
Intended for use when edging,
finishing around poles, or
operating on extremely sticky
surfaces.
High Rate This is the increased response
mode. In this mode, smaller
movements of the joysticks are
required to control machine
movement. Intended for use when
panning, traveling at high
speeds, or when minimum
directional control is required
while covering large areas.