Husqvarna Wacker Neuson CRT60-74LX Operator'S Manual Download

Page: 102 / 136

Technical Data

CRT60-74LX

102

wc_td000730en2.fm

10.3

Sound Specifications

The required sound specifications, per 1.7.4.2 (u), Directive 2006/42/EC of the
EC-Machine Regulations, are:

■

The sound pressure level at operator’s location (LpA):

93.4 dB(A)

■

The guaranteed sound power level (LwA):

115.5 dB(A)

These sound values were determined according to ISO 3744 for the sound power
level (L

) and ISO 11204 for the sound pressure level (L

) at the operator’s

location. The measurement for sound pressure level includes an uncertainty of
2.5 dB, while the sound power level includes an uncertainty of 1.5 dB per EN
12649.

Summary of Contents for Wacker Neuson CRT60-74LX









































































































































Search results

Summary of Contents for Wacker Neuson CRT60-74LX

Reviews:

Related manuals for Wacker Neuson CRT60-74LX

Brands by name

Popular brands

Husqvarna Wacker Neuson CRT60-74LX, Operator'S Manual

Search results

Summary of Contents for Wacker Neuson CRT60-74LX

Reviews:

Related manuals for Wacker Neuson CRT60-74LX

Brands by name

Popular brands