Husqvarna Wacker Neuson CRT60-74LX, Operator'S Manual

Page: 70 / 136

wc_tx004561gb.fm
70
Maintenance CRT60-74LX
6.9 Maintaining the Hydraulic Oil
When ■ Check the hydraulic oil level daily, adding fresh oil if necessary.
■ Replace the hydraulic oil and hydraulic oil filter every 250 hours if the machine is
being operated in hot climates (in temperatures above 32°C (90°F)).
■ Replace the hydraulic oil and hydraulic oil filter every 500 hours
Requirements ■ Machine shut down
■ Fresh hydraulic oil, as needed. (See Hydraulic Oil Requirements in this chapter,
or Trowel in the Technical Data chapter.)
■ Replacement hydraulic oil filter. See Changing the Hydraulic Oil Filter .
■ Plastic cloth and a container of sufficient volume to collect drained oil
Note: Collect, store and dispose of drained oil in accordance with current environ-
mental protection regulations.
Checking the
hydraulic oil
level
The hydraulic oil fill port (a) is located at the rear of the machine. Use this fill port
when refilling a high volume of hydraulic oil. Low volumes of hydraulic oil can be
added to the overflow bottle
(b) .
This procedure continues on the next page.
wc_gr014653
a
b