Husqvarna Wacker Neuson CRT60-74LX, Operator'S Manual

Page: 68 / 136

wc_tx004561gb.fm
68
Maintenance CRT60-74LX
Continued from the previous page.
4. Wipe the inside of the air cleaner body with a clean, dry cloth.
5. Reinstall the filter element inside the air cleaner body.
NOTICE: Never run the engine without the air cleaner. Severe engine damage will
occur.
6. Replace the cover by twisting to lock in place. Position it so that the dust ejector
points down.
6.7 Hydraulic Oil Requirements
Wacker Neuson requires the use of a premium grade, synthetic-based hydraulic
oil. It is designed to outperform conventional oils by flowing better at low
temperatures while resisting viscosity loss at higher temperatures.
When selecting hydraulic oil for your machine, be sure to specify anti-wear
properties. Wacker Neuson offers a premium grade blue hydraulic oil for use in this
machine.
NOTICE: Avoid mixing different brands of hydraulic oil.
Oil viscosity Most hydraulic oils are available in different viscosities. The SAE number for an oil
is used strictly to identify viscosity. It does not indicate the type of oil (engine,
hydraulic, gear, etc.). The higher the SAE number, the thicker the oil.
When selecting a hydraulic oil be sure it matches the specified SAE viscosity rating
and is intended to be used as a hydraulic oil. See
Trowel in the Technical Data
chapter.
WARNING
Fire or explosion hazards.
► Do not use gasoline or other types of low flash point solvents for cleaning the air
cleaner.